image

Introduction video (80 seconds)

Assembly Video

All videos related to RoboMaster S1


2019-08-23

  • Assembled by Cybozu and run on the 27th floor.
    • I got the video taken and Iā€™ll edit it later and put it on YouTube.
  • image
  • Completion photo
    • image
  • Photos along the way
    • image
    • image
    • image
    • image
    • image
  • Iā€™m an adult and itā€™s like 3-4 hours.
  • Q: Is there an omni wheel in the box? A: There are mechanam hole parts in the box and you assemble them yourself.

[Mr. Windhole https://www.facebook.com/photo.php?fbid=10219429361706669&set=a.2303140099905&type=3&xts%5B0%5D=68.ARBQ8faK_tr9SM2ZECWTG 4uH-HUUMnFUaqGPJ7KTuR4nvDNiybKQNhP8wdoZ4YjqmIhlpFnmyL5x9XlbhVpVKQf02CdF7DS3nORwan1G7k9Bp50IXO43Ss0b3Ylq0EkZ_xtacmRyVHQaPeW-hPf6 MIxsKqBHFgSyYJ3L07-nrodXuCMxmOBLbl_tPA0IuZIqzhOG8iG-eYi0Ptb0v3LO63xFQyRbiEk-rMTNH6r2XhPhWIdEe_YbGV-5WPAtgmzAVRsumx9a8 zKKXxvsKJCUKCb9txyePA8&tn=-R]Today I was assembling the DJI RoboMaster S1. To be exact, I was taking pictures of people who were assembling it while I was tweaking it (lol). Itā€™s pretty good and interesting. Maybe we can have a company competition or something? šŸ˜… Also, I would like to connect this to CoderDojo activities that provide programming opportunities for children.

  • Two cars against each other would be nice, but racing is also an option, just with the hallway as a lap course. https://pc.watch.impress.co.jp/docs/news/1192680.html

  • Tutorials for beginners

    • This gets me excited from the very first tutorial for beginners!
      • image
      • If you get hit, turn in that direction and hit back.
    • Evade by moving in a circle while aiming in the direction of the opponent
      • This is a ā€œwrite a program to get strongerā€ game.
      • image
    • The tutorial continues with the operating principle of the mechanum wheel (force synthesis), a discussion of coordinate systems, PID control, and
    • The line tracer was more stubborn than expected.
      • image
      • PID control of speed by calculating tangent angle
    • Finally, the control is controlled by receiving instructions at the marker, aiming and shooting at the marker of the instructions.
    • Q: For what age group? A: 14-ish.
  • Encountering the Unknown

    • image
    • Facebook
    • The camera on the main unit has a pretty wide-angle view, but my wife has requested that I not show the untidy part of the room, so I cropped out a part of it.
      • image
    • He comes back a few times and sniffs it.
  • image

  • The gel ball swelled up more than expected, the spilled ball was bouncyā€¦ hard to get by hand, so I collected it with a spoon.

    • image
    • This is about as much as I got.
      • image
    • It says 4 hours for water supply, but it doesnā€™t take that long to inflate, so you should put it in a little bit of water first and see how much it inflates.
    • Q: What is this? A: Bullets ejected by RoboMaster S1
    • The FAQ said.
      • The recommended ratio is 500 gel bullets (roughly the volume of a bottle lid) to 1000 ml of water.

  • Robomaster s1 onboard camera viewpoint, warning! Large creature approaching!

    • image
  • I removed the speed limit for beginners.

    • Speed limits are on by default but can be removed.
    • 3.5 meters per second forward, 2.5 meters per second backward
    • image
      • Facebook
      • I took this photo from above because there are many zones where photography is prohibited at home, but the angle of view is so narrow that itā€™s hard to see the speed of the camera.
      • I was about to explain that I might be too scared to give it my all because of the small space, when I realized that I should have made it an automatic operation instead of me controlling it.

https://twitter.com/kyasbal_1994/status/1162450332112187393?s=21&fbclid=IwAR0P0-bnCtBIpCcvIfRR6tkGKwsPxO4W3dIqDZPhuKS9CuEaOSQwQQlUSxE


This page is auto-translated from [/nishio/RoboMaster S1](https://scrapbox.io/nishio/RoboMaster S1) using DeepL. If you looks something interesting but the auto-translated English is not good enough to understand it, feel free to let me know at @nishio_en. Iā€™m very happy to spread my thought to non-Japanese readers.