- digital nameplate received at Builderscon 2018.
- I donât want to go into detail on the digital nameplate page, so Iâve split it up.
- Unusual Efforts in Electronic Name Tag Development or How I Stopped Worrying and Started Making âMystery Gadgetsâ - builderscon::blog
2018-09-11
- electronic_badge_2018/HOW_TO_LOGIN.md at master · builderscon/electronic_badge_2018
-
Login password : It is found in default_passwd.txt in the NAFUDA drive.
- Iâm getting an error message saying default_passwd.txt missing.
- Viewing the three connection methods, select Serial
touch /Volumes/NAFUDA/enable_g_serial- After rebooting, /dev/cu.usbmodem1421 does not appear
- After touch, after visualizing the existence of enable_g_serial in Finder, remove it, power off, reconnect the power supply, and see the following screen
- Hmm, change to serial mode does not seem to be working properly
- I guess weâll just have to connect UART.
- I tried to generate default_passwd.txt and rebooted it, just to see if it would work.
- The existence of the password was recognized.
- Once again
touch /Volumes/NAFUDA/enable_g_serial.- Still in g_mass_strage mode
- To be continued at UART.
- feedback
-
After rebooting, are the enable_g_serial files correctly erased from the NAFUDA drive?
-
If the file disappears correctly but is not reflected, try waiting 20 seconds after touch on the Mac before starting the eject operation! We are aware of the phenomenon!
-
- Try this first next time
What we want to do
- Wait 20 seconds and try eject first
- Login via SSH.
- Log in with UART
- Install Jenkins
- I want the source code in RasPi to be updated when I push to Github (without having to connect cables and write and stuff).
- fasten a button
- turn on an LED
- Make it a Pomodoro Timer
This page is auto-translated from /nishio/Builderscon2018nafuda using DeepL. If you looks something interesting but the auto-translated English is not good enough to understand it, feel free to let me know at @nishio_en. Iâm very happy to spread my thought to non-Japanese readers.